Відео

#askmark what do you think about the latest push for recreational CCR with the DiveTalk GO (manufacturered by KISS). Apparently it will be probably the cheapest unit on the market and it is also being allowed for use with Trimix. The last push into this market was probably that Mares Horizon SCR (manufactured by Revo) which is as good as a SCR can be and has the might of SSI behind it... Do you see the DiveTalk GO winning where the Horizon has stalled?

#AskMark can you introduce the full face masks? Always been curious when would it make sense to have/use one? Can you walk through the key pros & cons, key use cases and add your own opinion - what do you think about them, have you tried, do you like to dive with them?

#AskMark owning your own air compressor ever a good idea for a hobbyist diver? Are there any small enough units that would make sense for a person to own? Or is the acquisition + operational costs simply never justified?

#AskMark what's the deal with DPV cost? Why do those things cost like real motorbikes/scooters (i.e. 10-14k) when clearly there aren't that many parts and they are quite simple in their build? Is that just a supply/demand issue or are those costs actually justified somehow?

#askmark if you are a former diving instructor, why did you quit and what is it that you do now for a living?

Had the iX3M2 and it had lots of glitches. Their customer service was awful! I'll likely never buy anything from Ratio again. Now I have a Perdix 2 and it's a much better computer.

Will it be possible to watch the film later?

#AskMark Hi Mark, you are really the best. How much air should I put in the SMB to ensure it will be full at the surface and stand up? Is it correct to fully inflate it and deploy it, allowing the extra gas to be released by the deflator valve?

#askmark What is the average life expectancy of a 1st and / or 2nd stage? At which point would you recommend replacing your regulators?

#askmark What do you think about Circular Wing vs Horseshoe Wing for diving with doubles and stage? I loved the circular wing for single-cylinder recreational, and recently did the trimix course, which required diving with doubles and carrying a stage - during the course, I dived with a horseshoe wing, and it took some time learn to balance the bubble and stay in good trim. Which style of wing do you prefer for diving with stages on the side and how do you keep the trim? Love the channel - keep up the good work :)

I don't need any additional training to use a longhouse setup?

The yellow SMB usually signal emergency for diver down under. The orange one is meant for signalling caution of diver down below or a message attached at the top of the sausage .

I love cave diving! So wonderful hanging in the blue!

Thanks Mark for getting Jill talking. I'm a 30 caver n have started scuba and what better way to go basically where not many if any have ever gone before Love your adventures Jill thank you for sharing and inspiring exploration in our water systems most take for granted ... Cave on Jill...❤

What a very interesting lady 0:33

Glad I did not miss this interview!

#askmark Hi Mark, getting back in the water after quite a long break. Started diving back in ‘93 for around 10 years…diving was mainly in the English Channel off Dover, Malta, Gozo, Scapa and few others. I’m def not going back to 2min bottom times with all the kit in crap viz 😂. In recent years, found myself doing more holiday dives. This year already dived Gozo and Sharm area. Just purchased AL compact Pro regs, suunto Vyper novo with transmitter and now at the point of what style of bcd do I go for? I have an ok budget, so open to backplates, wings, Scubapro Hydros styles etc, but want the right set up so don’t have to change in the future. Main places plan to dive are warmer waters.

Most people can put their reg in the carryon, because fewer people carry elaborate expensive camera gear.

The APEKS necklace adaptor works perfectly and has the added advantage of being able to lock the regulator in the divers mouth in a rescue situation. Does what it says on the tin.

I have been looking a comparison to the IT300 and simply can't find any differences between the IT500. Any insight?

That was very helpfull! Very you so very much as always

Which DSMB do you have in this video? I like the features while still being minimalistic.

You need training they can KILL you

#AskMark Hello I'm in the market for a decent dpv / scuba scooter. while looking deeply into this I discovered what seems to a scooter scam. youtube is flooded with BS "top x" or people with their kids using them in reviews for these devices. they contain the same rebranded scooters for the most part... Sea Doo, Yamaha, Nautica.... all of which appear to be glorified pool toys for kids. even the models retailing for over $1k. Definitely some type of slimy market misinformation going on. could you do a video on this and possibly recommend some credible DPVs like the DiveX BlackTip. I think this would really help the community from buying junk. Thanks

During inflation it happend to me to get a lift upwards (bag of air alright, nothing fancy here). Is it better to deflate the BCD during use of the dSMB (maybe use the delating air for the dSMB) since it will pull you up anyways to counteract the boyancy of the dSMB?

#AskMark Sticking with the dSMB. Is there a difference between the Orange and Yellow as a surface indicator?

Fantastic video! I’m not overly experienced but you covered so many questions I wanted to ask in this video, well done I’ll fwd this on to the group I dive with who has a mixed bunch,from massively experienced to divers with 50 odd dives. Thanks maté appreciate 👍👌

#askmark, is there an increased risk by using yellow fins when diving with sharks?

“It’s a bag of air .. it’s gunna be buoyant” 😂😂

A lot of expensive lightweight aluminum spools have really sharp edges. I think it's ridiculous they don't smooth the milled holes. Depending on how you set it up, it can sever the line

Wish you could comment more on air integration Shopping for my 1st computer, and instructor days I need air integration for what I plan to do

"If you keep losing your car..." 😂 good one Mark haha

Hello guys! I’ve got a “hybrid” one from Mares, but when I deploy it, I always find a lot of water inside it. Is it normal? Do you have any suggestions for me?

Just don't lose your nice DSMB! Its safety equipment. A closed style DSMB is much better than any of the open bottom type - and you can use the safer oral inflation method that keeps the webbing and line away from your regs which are snag hazards.

I ❤❤❤my XS Scuba Pink dSMB. It’s about 6ft in length. Has a weight pocket so it can stand up easier at the surface & when deployed from my manta or finger reel. I can inflate it with my alternate, low pressure BCD hose or manually. It has a pressure release valve & stays pressurized. I bought it 7 years ago because: 1. I average 50 dives a year 2. I dive in a dumb boat driver area (Pompano Beach, FL) meaning anyone can rent a boat & ignore all the rules of boating & claim my head is a coconut as their excuse for running me over 3. In a two foot wave you can’t see cheap ones, they are too short between waves 4. It doubles as a lift bag. Memorial wknd I lifted an 11 lbs anchor out of the reef. Dive charter was happy to pick up my find as I sent it to the surface 20 min into my 60 min dive at 65 ft.

I 3D print my own spools. Neutrally buoyant so it doesn’t fall into the abyss if it slips and costs cents to print a new one if I do loose it.

Excellent 👌 We've shared this with our Vancouver Meetup Dive group.

Ahh, I always lose my car!

I had the same problem but with knives Finally I bought an eye watering expensive one Never misplaced it or let out of my sight since Sometimes being careless has to hurt 😁

#AskMark spool or reel for deploying dSMB? pros and cons?

If only the Apeks spool is only £70. Even the 15m version has gone up to £88 RRP. The 3 bigger sizes are well over £100. 😱

Hi #askmark a while ago I asked you about diving with a third cylinder in addition to my twinset in order to extend bottom time during multiple dives. You said it would be best to get training due to task loading. Just wanted to let you know that this week I’m becoming a tech diver with deco procedures and advanced nitrox, and I’ve been doing maskless stage drop off and recovery on gorgeous wrecks! Thanks for the advice and guidance!

Step #1 buy gear that is easily maintainable and repairable in the first place! If it's got proprietary plastic steer clear. I have had some success with replacing/modifying inflators with standard k-type ones... But really, just opt for gear that uses standard designs wherever possible. Gotta love a completely standard Backplate and Wing setup and well proven/servicable regulators - zero worries ever. With a plastic drysuit zip such as usually used on a Santi, refer to those institutions you can find on their website/UA-cam.

#askmark Hy, thank you very much for your great videos. I would be interested in your opinion or advice regarding my future diving career: I would like to focus on cave diving or wreck diving in the long term and am considering learning either sidemount or rebreather for this. What would be your advice as to which path is the right one? About my background: I mostly dive in German lakes and occasionally on vacation. All the best to you and please keep making great videos

Who is Steven?

#ASKMARK I’ve been diving a DiveRite stainless backplate and wing and one of my friends have been looking at a Hog backplate and wing and wanted to ask about people’s opinions on them

#ASKMARK. Good day. Could I use the orion signal flares in the event of getting left behind in ocean. Could be helpful at night in the dark. Was thinking of putting them in a steel screw able waterproof container. What would you suggest. Thank you and must say I enjoy all your helpful videos.

20 Dollar?

Tell us more about the aftermarket fabric mask strap. I have an oceanic shadow mask I would love to swap out for something more elastic.

I like your shirt